Electrical accidents occur without warning. In Pakistan, where standard single-phase mains operate at 230 volts (50 Hz) and three-phase industrial lines operate at 400 volts, an electric shock can turn fatal within seconds. Industrial areas in cities like Faisalabad, Karachi, and Gujranwala face high rates of electrical trauma due to substandard wiring, lack of residual current devices, and high humidity during monsoon seasons. When an electrical shock happens, bystanders often panic, either attempting a rescue that endangers their own lives or delaying vital interventions. Understanding how to manage the first three to five minutes following an incident can mean the difference between immediate recovery, permanent disability, or death.
Scene Assessment and Safe Isolation
The absolute priority in an electrical emergency is protecting the rescuer. Touching a victim who remains in contact with an active circuit completes the electrical path to ground, resulting in a secondary casualty. Before approaching, stop and evaluate the source of the shock. In domestic and light-commercial environments, look for cords, submerged water heaters (instant geysers), ungrounded metal enclosures, or severed cables.
If the victim is still touching the energized source, break the circuit immediately. Locate the main distribution board (DB) and flip the main breaker or remove the cut-out fuse. In many residential properties in Pakistan, panels are mislabeled or installed behind locked gates. If the main switchboard is inaccessible, use a dry, clean, non-conductive object—such as a seasoned wooden broom handle, a heavy PVC pipe, or a dry wooden chair—to separate the victim from the live conductor.
Never use metallic objects, damp wood, or wet rags. In humid conditions or standing water—common during urban flooding or inside textile processing halls—do not walk toward the victim if you feel a tingling sensation in your legs. This sensation indicates "step potential," where voltage differentials in the ground create fatal shock currents between your feet. Back away immediately by hopping on one foot or shuffling your feet together until the power is confirmed dead.
Primary Triage and Alerting Emergency Services
Once the victim is clear of the electrical current, immediate medical assessment must begin. Simultaneously, instruct a specific bystander to call Rescue 1122. In Pakistan, Rescue 1122 provides emergency medical technicians trained in basic life support and defibrillation. Clearly state the exact location, report an electrical shock accident, and specify whether the patient is unconscious or unresponsive.
Check the victim's responsiveness by gently tapping their shoulders and speaking loudly near both ears. In an electrical shock, victims often experience stunned confusion, complete loss of consciousness, or sudden respiratory arrest. If the patient does not respond, place them flat on their back on a dry, firm surface.
Open the airway using the head-tilt, chin-lift method: place one hand on the forehead and gently tilt the head back, while lifting the chin forward with your other hand. Look, listen, and feel for normal breathing for no more than 10 seconds. Do not confuse agonal gasps (irregular, snorting sounds) with genuine breathing. If the patient is not breathing or is only gasping, initiate cardiopulmonary resuscitation (CPR) without delay.
Administering CPR for Cardiac Arrest
Alternating current (AC) at 50 Hz, the standard frequency delivered by DISCOs (such as FESCO, LESCO, and K-Electric), interferes with the human heart's electrical conduction system. Even a brief exposure of 50 to 100 milliamperes across the chest can induce ventricular fibrillation, an uncoordinated quivering of the heart muscles that halts blood circulation.
Position your hands in the center of the victim’s chest, on the lower half of the sternum. Interlock your fingers, keep your elbows locked, and position your shoulders directly above your hands. Deliver compressions at a depth of 5 to 6 centimeters (2 to 2.4 inches) and a rhythm of 100 to 120 beats per minute. Allow full chest recoil between compressions without bouncing your hands off the chest.
If trained and equipped with a barrier mask, deliver 2 rescue breaths after every 30 compressions. Each breath should take one second and make the chest visibly rise. If you are not trained in rescue breathing or lack a clean barrier device, perform continuous compression-only CPR. Every minute CPR is delayed decreases the chance of survival by 7 to 10 percent. Continue uninterrupted until the victim shows clear signs of consciousness, an automated external defibrillator (AED) arrives, or Rescue 1122 personnel relieve you.
Managing Electrical Burns and Secondary Physical Trauma
Electrical burns are deceptive. Because current travels along low-resistance internal pathways—nerves, blood vessels, and muscles—the external skin damage often hides extensive subcutaneous devastation. An electric shock typically produces two focal injuries: an entry wound (often where the wire made contact) and an exit wound (where the current discharged to ground, frequently the feet, hands, or buttocks).
Do not apply local home remedies such as mustard oil, toothpaste, flour, or raw eggs to electrical burns. These materials introduce bacteria, leading to sepsis. Cool the burn area with clean, cold, running tap water for at least 20 minutes to limit tissue necrosis. Do not use freezing ice water, which constricts capillaries and deepens tissue death. Cover the cooled burns loosely with clean, dry, sterile gauze or a freshly washed cotton bedsheet. Never burst blisters or attempt to peel away clothing that has fused to the charred skin.
High-voltage shocks and severe 230V muscle contractions often throw victims across a room or off scaffolds and ladders. Assume the patient has sustained a spinal injury or fractures. Avoid twisting or bending the patient’s neck and spine. If the patient is breathing normally but unconscious, gently roll them into the recovery position (on their side) while keeping the neck immobilized to prevent them from choking on vomit or tongue obstruction.
High-Voltage Protocols: Distribution Lines and Substation Hazards
High-voltage accidents (defined as installations operating above 1,000 volts, such as 11kV primary distribution lines and 132kV grid infrastructure) demand entirely different safety reactions than domestic incidents. At these voltages, electricity can arc through open air across several feet without direct contact.
If an individual comes into contact with a fallen 11kV overhead wire, remain at least 10 meters (33 feet) away. Do not attempt to move the victim using wooden sticks, PVC pipes, or everyday tools; these materials cannot withstand high voltages and will conduct fatal currents. Keep the general public away and phone the emergency control room of your local distribution utility (e.g., FESCO, IESCO, K-Electric) to isolate the line feeder at the grid station before approaching.
If a live cable falls onto a vehicle you are occupying, remain inside. The vehicle's rubber tires isolate the chassis, making it safer to stay put. If the vehicle catches fire and you must escape, jump clear of the vehicle without touching the metal frame and the ground at the same time. Land with both feet together, and shuffle or hop away to clear the hazardous zone without creating step-potential paths across your legs.
Post-Shock Medical Surveillance and Workplace Protection
Every person who experiences an electric shock requires immediate evaluation at an emergency hospital, even if they walk away appearing unharmed. Current traversing the myocardium can trigger delayed cardiac arrhythmias up to 24 hours after the incident. Furthermore, severe internal muscle damage releases myoglobin proteins into the bloodstream, a condition known as rhabdomyolysis, which rapidly clogs renal tubules and precipitates acute kidney failure.
Workplaces must systematically remove shock hazards at the engineering level. In Pakistan, high-risk industrial units and residences frequently operate with broken earth pits or bypassed circuit protections. Retrofitting electrical panels with Residual Current Circuit Breakers (RCCBs) or Ground Fault Circuit Interrupters (GFCIs) provides definitive shock protection. An RCCB trips within 30 milliseconds when it detects an earth leakage as small as 30mA—well below the threshold of cardiac arrest.
Procuring genuine, certified 30mA RCCBs costs between PKR 4,500 and PKR 12,000 per unit, a small investment compared to the human and financial cost of an industrial fatality. Abdullah International emphasizes compliance with PEC (Pakistan Engineering Council) and IEEE safety standards to prevent these emergencies entirely through dedicated earthing systems and insulated industrial installations. Regular visual audits by Abdullah International ensure that physical insulation, copper earthing electrodes, and trip mechanisms remain responsive in harsh operating environments.
Conclusion
Electrical accidents occur within fractions of a second, leaving no time to consult reference materials or debate procedures. Survival depends directly on safe isolation of the current, swift alert to emergency services, and relentless chest compressions if breathing ceases. Inspect your switchboards today, confirm the operational integrity of your circuit breakers, and install RCCB protection immediately to eliminate shock hazards at their source.

